Not suitable for cars with dpf filter. If you need car camshaft with dpf filter, write to us before you buy. Hydraulic pushers (hard type) x8 pieces. Camshaft of connecting rods x10 pieces.
Screw 038 103 714 x10 pieces. Screw 038 103 714a x 8 pieces.Mounting instructions camshaft motor parts. Check that the new camshaft is identical to the old camshaft, especially with regard to the oil passages. Make sure the camshaft bearings are not worn or excessively damaged. Make sure that the valves, valve seats, flanges, springs and seals of the valve stems are in good condition.
Distribution gears and distribution chains should be inspected for wear. Their replacement or machining must be done as needed. The timing belts must always be replaced when installing a new camshaft.On the new camshaft, check that the oil passages are clean and unobstructed. Remove all preservatives completely from all contact surfaces, taking care not to damage the pads or the contact surfaces. New cam followers / push rods must be fitted.
This is very important in order to avoid premature wear of the camshaft. Claims will be invalid if this transaction is not performed. Lubricate all cam bushings and camshaft lobes thoroughly with pre-lube or good quality engine oil.Axial play of the camshaft must be checked and adjusted in accordance with the engine manufacturer's workshop manual. Fill the sump with a new oil and fit a new oil filter. Finally, the push rods must be checked and correctly set.
This operation must be repeated after a journey of 800 kms. If you broke the camshaft again then it's okay there. The item \, engine parts \ camshafts \The seller is \This item can be delivered anywhere in the world.